BIKE FIT – why do you need one?

A wheely good afternoon to you all from the world of Paul Ashman Cycling. I hope you are all well and if like me willing this cold weather to end. I have to say the last couple of rides have been freezing and last weeks race allowed me to very quickly lose feeling in my fingers and toes. Never mind only 15 weeks and I’ll be out riding in that Majorca sunshine 🙂

So onto my blog for today and it’s all about bike fits. Many people will ask the question do I need one or will it help me? The answer hands down is yes. We all suffer with aches and pains when we ride and those little niggles that won’t go away and most of those is an ill fitting bike. Believe it or not a small thing like seat too high or low, cleat angle wrong or stem length incorrect can have a massive impact on your position on the bike and lead to all sorts of issues.

I had my first one some years ago and back then it sorted me out. Since then I know my position due to weight loss and being fitter has changed so I thought best get checked over again. Also having a new bike can make the difference as every angle of geometry affects the set up. So I took a visit to Danny Clayton my sports therapist who is also a qualified bike fit specialist ( http://www.dc-injury ).

The bike fit took in three stages to fully access and look at every aspect. To start with general body shape and posture was looked at. Here it was noted that I lean over onto the outer part of my right foot this due to a bunion and previous ankle injuries. This as a result can have a knock on effect and could be the cause of occasional knee pain I get on the inside of my right joint so this was the first area to address, more on this later.

Secondly Danny assessed my body flexibility and strength in various parts of the body. This was done by means of various flexing and restraint type manoeuvres. This highlighted a slightly weak hamstring but otherwise I am in a good shape which pleased me. That showed me that despite my age my body is in good order and this bodes well for future goals and targets. It’s all about marginal gains and even though this term is a myth to some it clearly does work and every little step makes a difference.

Finally it was time to jump on the bike set up on the turbo. This allowed us to check all angles and position when riding. There is a set of parameters as a guide and sitting in between these measures for a well set up ride position. My angles all work well and showed stem length, saddle height and crank arm length correct for what I need. There is room for a slight raise of the seat post in the future to increase power but this is when my hamstrings strengthen. Back to the knee pain I occasionally get it was decided to address this by way of 1mm shims. These sit under the cleats and raise the inner part of the foot by 1mm increments to offset the outer foot lowering. I will add a shim very two weeks up to a maximum of three to see how this goes but hopefully it will have an impact. Danny has also given me a set of exercises to do each day to build up the hamstring strength.

The overall fit took two hours and was an incredibly interesting and fruitful session. I personally learnt lots and to come away with data, pictures, a full report and ways to improve is a great bonus. I can’t tell anyone how to spend their money but would totally recommend this and certainly suggest give Danny a call and see how he can help you with bike fit or other sports related injuries.

Until next time happy riding and enjoy ticking the miles off rolling the tarmac!